Applied Structural Dynamics LaboratoryDepartment of Civil and Environmental Engineering

Kim, M., Lee, C., Chae, Y. (2025). “Design of Minimum Phase Digital FIR Notch Filter for Real‐Time Hybrid Simulation.” Earthquake Engineering and Structural Dynamics, https://doi.org/10.1002/eqe.70047

Chen, S., Guo, X., Chae, Y., Luo, J., Fang, Y., Wu, Z., Zhang, C. (2025). “Shaking table tests and numerical studies of steel frame structure-equipment systems with combined base and partial isolation.” Engineering Structures, 342: 120933

Park, J., Lee, S. C., Chae, Y., Cho, J. Y. (2025). “A new similitude law for testing scaled RC structures.” Scientific Reports, 15(1): 22037

Chae, Y., Lee, C., Kim, J. (2025). “New Flexible Loading Beam for Bidirectional Real‐Time Hybrid Simulation of Reinforced Concrete Columns.” Earthquake Engineering and Structural Dynamics, 54(7): 1912-1917

Chen, S., Guo, X., Chae, Y., Luo, J., Fang, Y., Wu, Z. (2025). “Experimental and numerical studies on indoor substation prefabricated steel frames with a partial isolation system.” Structures 75, 108843

Park J, Chae Y, Chin WJ, Cho CB. (2025). “Real-time hybrid simulation for investigating the seismic response of a bridge isolated with lead rubber bearings.” Earthquake Engng Struct Dyn. 2024;1-14. https://doi.org/10.1002/eqe.4272 

Goh, W., Chae, Y. (2025). “Enhanced System Identification and Finite Element Model Updating for Concrete Random Fields.” Journal of the Earthquake Engineering Society of Korea, 29(3): 181-188

Park, J., Park, M., Chae, Y., Kim, C. Y. (2025). “Seismic Performance Evaluation of Lead Rubber Bearings Using Real-e Hybrid Simulation.” Journal of the Earthquake Engineering Society of Korea, 29(1_spc): 85-89

You, G., Kim, M., Chae, Y. (2024). “Development of a 6-DOF Actuating System for Implementing Real-Time Hybrid Simulation of Floating Bridge Systems Under Wind and Wave Loads.” World Conference on Floating Solutions, 589-597

Yazdanpanah, O., Park, M., Chang, M., Chae, Y. (2024). “Mastering seismic time series response predictions using an attention-Mamba transformer model for bridge bearings and piers across varied testing conditions.” Scientific Reports, 14(1): 29751

Park, J., Park, M., Chae, Y., and Kim, C-Y. (2024). “Dynamic Cyclic Loading Tests for Investigating the Influence of Loading Rate and Axial Force on the Lateral Response of RC Columns.” Earthquake Engineering and Structural Dynamics, 53(4): 1537-1551

Goh, W., Chae, Y. (2024). “Framework of data fusion for system identification of nuclear power plant structures.” IASMiRT

Cho, C. B., Chae, Y., and Park, M. (2023). “Improved Real-Time Force Control for Applying Axial Force to Axially Stiff Members.” Earthquake Engineering and Structural Dynamics, 53(1), 331-347

Park, J., Park, M., Chae, Y., and Kim, C-Y. (2023). “Real‐time hybrid simulation for investigating the influence of vertical ground motions on the lateral response of RC piers.” Earthquake Engineering and Structural Dynamics, 52(10): 2928-2944.

Yazdanpanah, O., Chang, M. Park, M. and Chae, Y. (2023). “Force-deformation relationship prediction of bridge piers through stacked LSTM network using fast and slow cyclic tests.” Structural Engineering And Mechanics, 85(4): 49-484

Stanikzai, M., Elias, S., and Chae, Y. (2022). “Recent Advances in Hybrid Vibration-Control Systems.” Practice Periodical on Structural Design and Construction, 27(3): 03122003

Rabiee, R. and Chae, Y. (2022). “Real-time hybrid simulation for a base-isolated building with the transmissibility-based semi-active controller.” Journal of Intelligent Material Systems and Structures. https://doi.org/10.1177/1045389X221079680.

Chae, Y. and Park, J. (2022). “Multi-Axial Cyclic Loading Tests for RC Shear Walls of Nuclear Power Plant Structures.” Engineering Structures, 253(15): 113779.

Chae, Y., Chang, M., Mun, H.S., Lim, S.H. (2021). “A Structural Health Monitoring Method for Automatic Gauge Changeover Systems Using Digital Image Correlation.” Journal of The Korean Society for Railway, 24(4); 395-403.

Chae, Y., Lee, J., Park, M., and Kim, C-Y. (2020). “Closure to “Fast and Slow Cyclic Tests for Reinforced Concrete Columns with an Improved Axial Force Control”.” ASCE Journal of Structural Engineering, 146(7): 07020002

Chae, Y., Lee, J., Park, M., and Kim, C-Y. (2019). “Fast and Slow Cyclic Tests for Reinforced Concrete Columns with an Improved Axial Force Control.” ASCE Journal of Structural Engineering, 145(6): 04019044

Rabiee, R. and Chae, Y. (2018). “Adaptive Base Isolation System to Achieve Structural Resiliency under both Short- and Long-Period Earthquake Ground Motions.” Journal of Intelligent Material Systems and Structures, 30(1), 16-31.

Chae, Y. and Rabiee, R. (2018). “Implementation of effective force testing for nonlinear structures.” ASCE Journal of Structural Engineering, 144(10): 04018193.

Lee, J., Park, M., Chae, Y., and Kim, C-Y. (2018). “Verification of real-time hybrid test system using RC pier model.” Journal of the Earthquake Engineering Society of Korea, 22(4): 253-259.

Chae, Y., Lee, J., Park, M., and Kim, C-Y. (2018). “Real-time hybrid simulation for an RC bridge pier subjected to both horizontal and vertical ground motions.” Earthquake Engineering and Structural Dynamics, 47(7), 1673-1679.

Chae, Y., Rabiee, R. Dursun, A., and Kim, C-Y. (2018). “Real-time force control for servo-hydraulic actuator systems using adaptive time series compensator and compliance springs”, Earthquake Engineering and Structural Dynamics, 47(4), 854-871.

Chae, Y., Ricles, J.M., and Sause, R. (2017) “Development of equivalent linear systems for SDOF structures with magneto-rheological dampers for seismic design application.” Journal of Intelligent Material Systems and Structures, 28(19), 2675-2687.

Chae, Y., Park, M., Kim, C-Y., and Park, Y.S. (2017). “Experimental study on the rate-dependency of reinforced concrete structures using slow and real-time hybrid simulations.” Engineering Structures, 132:648-658.

Chae, Y., Dong, B., Ricles, J.M., and Sause, R. (2015). “Performance-based design procedure for structures with magneto-rheological dampers”, Encyclopedia of Earthquake Engineering, DOI 10.1007/978-3-642-36197-5_310-1.

Friedman, A., Dyke, S., Phillips, B., Ahn, R., Dong, B., Chae, Y., Castaneda, N., Jiang, Z., Zhang, J., Cha, Y., Ozdagli, A., Spencer, B., Ricles, J., Christenson, R., Agrawal, A., and Sause, R. (2015). “Large-Scale Real-Time Hybrid Simulation for Evaluation of Advanced Damping System Performance.” ASCE Journal of Structural Engineering, 141(6), DOI: 10.1061/(ASCE)ST.1943-541X.0001093, 04014150.

Chae, Y., Ricles, J., and Sause, R. (2014) “Large-scale real-time hybrid simulation of a 3-story steel frame building with magneto-rheological dampers”, Earthquake Engineering and Structural Dynamics, 43(13), 1915-1933.

Chae, Y., Kazemibidokhti, K., and Ricles, J.M. (2013) “Adaptive time series compensator for delay compensation of servo-hydraulic actuator systems for real-time hybrid simulation”, Earthquake Engineering and Structural Dynamics, 42(11), 1697-1715.

Chae, Y., Ricles, J., and Sause, R. (2013). “Large-Scale Experimental Studies of Structural Control Algorithms for Structures with Magnetorheological Dampers Using Real-Time Hybrid Simulation.” ASCE Journal of Structural Engineering 139, SPECIAL ISSUE: NEES 1: Advances in Earthquake Engineering, 1215–1226.

Chae, Y., Ricles, J.M., and Sause, R. (2013). “Modeling of a large-scale magneto-rheological damper for seismic hazard mitigation. Part I: Passive mode”, Earthquake Engineering and Structural Dynamics, 42(5), 669-685.

Chae, Y., Ricles, J.M., and Sause, R. (2013). “Modeling of a large-scale magneto-rheological damper for seismic hazard mitigation. Part II: Semi-active mode”, Earthquake Engineering and Structural Dynamics, 42(5), 687-703.

Chen, C., Ricles, J.M., Karavasilis, T., Chae, Y., and Sause, R. (2012). “Evaluation of a real-time hybrid simulation system for performance evaluation of structures with rate dependent devices subjected to seismic loading”, Engineering Structures, 35, 71-82.

Chae, Y. and Kim, J. K. (2003). “Implementation of configuration dependent stiffness proportional damping for the dynamics of rigid multi-block systems”, Journal of Earthquake Engineering and Engineering Vibration, 2(1), 87-97.

Kim, J. K. and Chae, Y. (2000). “Nonlinear dynamic response analysis of slender rigid blocks mounted on seismic isolation systems”, Journal of the Earthquake Engineering Society of Korea, 4(4), 93-104.